LFO 2 Rate
Changes the LFO 2 rate.
LFO 2 Phase
Sets the inital phase of LFO 2, ranging from 0 to 359
degrees. If the LFO free-run mode is turned off, the
LFO will reset whenever you press a key. The default
phase is zero, but by using this destination you can
specify other values. This is useful whenever the mod-
ulation is strong enough to impact the transients of
your sounds.
Filter Env Atk
Changes the value of the attack time of the filter en-
velope.
Filter Env Dec
Changes the value of the decay time of the filter enve-
lope.
Filter Env Sus
Changes the value of the sustain level of the filter en-
velope. This parameter can be used for filter cutoff
modulation, commencing with the onset of the sustain
stage.
Filter Env Rel
Changes the value of the release time of the filter en-
velope.
Amp Env Atk
Changes the value of the attack time of the amplitude
envelope. A useful destination to make the attack time
dependent on velocity, for instance, with lower veloci-
ties generating a slower (and thus softer) attack. An-
other option is to slightly randomize the attack time,
to make repeated notes sound more interesting.
Amp Env Dec
Changes the value of the decay time of the amplitude
envelope.
Amp Env Sus
Changes the value of the sustain level of the amplitude
envelope. This parameter can be used for amplitude
modulation, commencing with the onset of the sustain
stage.
Amp Env Rel
Changes the amplitude envelope release time.
30
Antidote User’s Manual
Summary of Contents for Antidot
Page 1: ...User s Manual...
