11
Menu Control Buttons
No. Symbol
Function
A
1. Auto-adjust.
2. Move the selector highlight bar upward.
M
1. Open the OSD (On Screen Display).
2. Move the selector highlight bar downward.
POWER
1. Turns the power on / off.
2. LED indicator glows green when power is ON,
orange in stand by mode.
1. Decrease the value of the function selected.
+
1. Increase the value of the selected function.
Your monitor was designed with specialized control buttons located under the bezel to virtually reduce accidental resolution
resets and offsets during operation. To activate a button you must press firmly towards the back of the button where a small
brim is located.
•
Press the “A” button to auto adjust horizontal and vertical position to default settings.
•
Press the “M” button to display the OSD menu.
•
Select the desired function menu, by pressing
“
A
”
or the “M” button.
•
Push the “ ” or
“
+
”
button to increase or decrease the value and change the setting.
•
The OSD menu will close automatically after 15 seconds of inactivity.
NO INPUT SIGNAL
If this warning appears,
1. Check the signal connection between the computer and LCD monitor.
2. Check the connector. If it is bent or damaged, the signal cable may be affected.
3. If the monitor is in “sleep” mode to save power, please move the mouse or press any key to “wake” it and return to
working mode.
4. Please check input diagrams, and make sure the monitor has been properly configured.
SIGNAL OUT OF RANGE
This warning indicates that the input signal frequency does not match those supported by this monitor. For this model,
horizontal frequency must be in the range of 31.46 ~ 80.00 KHz and vertical frequency in the range of 56.25~75.03 Hz.
Please make sure your input signal is within these ranges.