© 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED
930348K
Quick Reference
Quick Reference
930348K
© 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED
Mounting
Contacting Syn-Apps
*Ceiling Tile or Dry Wall
Speaker Assembly
#8 Fender Washer (3x)
#8 Nylon Thumb Nut (3x)
#6 Screw (3x)
Dry Wall Mounting Kit
Template
Plastic Ribberd Anchor (3x)
Dry Wall Mounting Kit
#8-32x1 1/4" (3X)
Ceiling Mounting Screw
*Optional Reinforcement Mount
P/N: 010991A (Sold Seperately)
Tools Required for Installation:
•
(1) Sheetrock saw or
(1) Drywall cutter
•
(1) #2 Phillips Screwdriver or
(1) #2 Phillips Screwdriver Hex Bit
To mount a speaker:
1. Use the
TEMPLATE
on the back of this
document to cut a hole in the wall or
ceiling, and prepare holes for the screws.
2. Plug the Ethernet cable into the speaker
assembly. The yellow light verifies the
network connection.
3. For drop ceiling mounting, position the
IP
SPEAKER ASSEMBLY
in the ceiling so
that its screw holes align with those you
prepared.
4. For drywall mounting, place the three
PLASTIC RIBBED ANCHORS
in the
holes you prepared, and position the
IP
SPEAKER ASSEMBLY
over them,
aligning the screw holes in the assembly
with the anchors.
5. For drop ceiling mounting*, use the three
8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS,
and
#8
FENDER WASHERS
to secure the
speaker.
For drywall mounting, use the three
#8
SHEET METAL SCREWS
to secure the
speaker.
* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part
number 010991).
Corporate Headquarters
Syn-Apps LLC
2812 N Norwalk
Suite 112
Mesa, AZ 85215
Phone: 480-664-6071 / 866-664-6071
Fax: 480-659-8999 / 866-659-8999
http://www.syn-apps.com/resources/support
Email:
http://www.syn-apps.com/contact-us
Dimensions
Connecting Power
Features
9.000 [228.60]
3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
AUX SPEAKER (-)
AUX SPEAKER (+)
GND
LINE OUT (-)
LINE OUT (+)
+5V OUT
RELAY NO
RELAY COM
AUX POWER (-)
AUX POWER (+)
(+12VDC @ 1A)
J10
J9
N/C
N/C
CLASS II WIRING
9.000 [228.60]
3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
PoE Injector (Part #010867)
Non PoE Switch
802.3af Compliant PoE Switch
RTFM Switch
To broadcast a device’s current IP address, press and
release the RTFM switch within a five second window.
To restore a device’s factory default settings, press and hold
the
RTFM
switch for more than five seconds.
Speaker Volume
Network Link/Activity LED (yellow)
Speaker Status LED (green)
A solid light confirms that the speaker is operational.
