Step 6 Install stopper and pivot rod to drain
Step 7 Connect lift rod and adjust linkage
Care of faucet finish
Clean finish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may be
used to preserve finish area.
Valve cartridge replacement
Step 8 Flush water supply lines
3/32" Allen
wrench
3/32" Allen
wrench
OFF position
OFF = CW
OFF = CCW
Replace appropriate hot
and cold cartridge as
referenced in Replace-
ment Parts table.
May also use a 17mm
deep socket wrench.
1 2 3
Drain body
1/2" (13 mm)
Pipe
Sealant
1
2
non
removable removable
Page 3