10
11
BATTERY REPLACEMENT
IMPORTANT: Spent batteries should not be disposed of with normal household
waste. Contact your local authority for information on waste disposal and recycling.
SF250
Seals and screws
SF251
Sensor kit (single)
SF252
Sensor kit (10 pack)
SF253
Solenoid valve kit (single)
SF254
Solenoid valve kit (10 pack)
SF255
Solenoid housing kit (single)
SF256
Solenoid housing kit (8 pack)
SF257
Insert kit
SF258
Battery box
SF259
9V switching transformer
SPARE PARTS LIST
MAINTENANCE
FILTER CLEANING INSTRUCTIONS
This faucet is provided with one stainless steel filter preventing foreign particles to enter
the lines. It is recommended to clean the filter every six (6) months. If the water flow has
decreased, this can be because the filter is clogged. The filter can be cleaned as follows:
1. Shut-off the water shut off valve (angle valve).
2. Remove the filter located between the solenoid valve housing and the inlet adapter \
shut off valve.
3. Wash the filter under running water.
4. Reassemble the parts.
5. Make sure that there is no water leakage.
CARE AND CLEANING OF CHROME AND SPECIAL FINISHES
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like.
Use of any prohibited cleaning or maintenance products or substances could damage the
surface of the faucet. For surface cleaning of faucet use ONLY soap and water, then wipe dry
with clean cloth or towel. When cleaning bathroom tile, the faucets should be protected
from any splattering of harsh cleansers.
SOLENOID VALVE SERVICING
The solenoid valve diaphragm requires periodical cleaning every six (6) months. Remove
the diaphragm from the solenoid valve and examine it for dirt. in case it is dirty or clogged,
wash it under running water and reassemble it.
Do not attempt to dismantle the solenoid valve if you are unfamiliar with electronic
solenoid valves.
BATTERY MODELS ONLY
When the battery weakens, the LED indicator light will blink at a constant rate when the user’s hands are
within the sensor range. The battery must be replaced within two weeks.
TO REPLACE THE BATTERY:
FOR S6960B:
(EN)
3 .Remove the old batteries
(EN)
2 .Carefully open the battery
box
(EN)
1. Unscrew the holding screw
(EN)
5. Close the box
(EN)
4. Replace the used batteries
with a new 6 X 1.5V batteries (Lithium
battery is recommended).
New Batter
y
Old Batter
y