Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc.
■
symmons.com
■
■
ZV-3081
REV A
■
040918
Installation Cont.
Problem
Cause
Solution
Finish is spotting.
Elements in water supply may cause
water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Troubleshooting Chart
1
2
J
3
1
4
2
C
K
A
C
6) Install showerhead (J) to shower
arm turning clockwise to tighten
(412SH only).
7) Attach large end of hand
shower hose (C) to hand shower
wand (K). Attach small end
of hand shower hose (C) and
washer to wall elbow (A). Turn
clockwise to tighten.
Notes:
1) DO NOT use plumber tape on
fittings with face seal washers or
o-ring seals.
2)
DO NOT OVERTIGHTEN fittings
with face seal washers or o-ring
seals.