Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc.
■
symmons.com
■
■
ZV-3195 REV B
■
061419
1) Measure and mark centerlines for
mounting bracket installation using
dimensions on page 1.
2
1
2a)
Dry Wall Option:
Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 5/16" holes
into wall.
1
3
3
2
3) With mounting brackets in
position, secure to wall using
screws.
2
5) Secure with set screw.
2b)
Stud Option:
Place mounting
brackets into desired position.
1
4) Hang top of accessory on
mounting bracket. Lower into
position.
1
2
Installation
Note:
673TB-18, 673TB-24 and 673TP
only. Make sure both centerline marks
are level.
Note:
For plaster walls 1/2" thick or
less, insert toggle tool into toggle
anchor to secure behind wall prior to
installing accessory trim.
Troubleshooting Chart
Problem
Cause
Solution
Finish is spotting.
Elements in water supply may cause
water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.