Symmons DURO ACTIVESENSE S6360B Installation And Maintenance Manual Download Page 7

10

11

MAINTENANCE

FILTER CLEANING INSTRUCTIONS
This faucet is provided with one stainless steel filter preventing foreign particles to enter the lines. It 
is recommended to clean the filter every six (6) months. If the water flow has decreased, this can be 
because the filter is clogged. The filter can be cleaned as follows:
1. Shut-off the water shut off valve (angle valve).
2. Disconnect the flexible pipe/s.
3. Remove the filter(s) and wash it/them under running water.
4. Reassemble the parts.
5. Make sure that there is no water leakage.

CARE AND CLEANING OF CHROME AND SPECIAL FINISHES
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use of 
any prohibited cleaning or maintenance products or substances could damage the surface of the 
faucet. For surface cleaning of faucet use ONLY soap and water, then wipe dry with clean cloth or 
towel. When cleaning bathroom tile, the faucets should be protected from any splattering of harsh 
cleansers.

SOLENOID VALVE SERVICING
The solenoid valve diaphragm requires  periodical cleaning every six (6) months. Remove the 
diaphragm from the solenoid valve and examine it for dirt. in case it is dirty or clogged, wash it under 
running water and reassemble it.
Do not attempt to dismantle the solenoid valve if you are unfamiliar with electronic solenoid valves.

SPARE PARTS LIST  

Seals and screws kit

SF280

Solenoid valve kit

SF253

Filter

SF263

Battery box (batteries excluded)

SF258

12V switching transformer

SD010

SD010
12V Switching Transformer

SF258
Battery box 

SF280
Seals and Screws kit

SF253

Solenoid valve kit

SF263
Filter

Summary of Contents for DURO ACTIVESENSE S6360B










Reviews: