2
Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
(800)796-6667
■
Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-3013 REV 0
01/15/2014
1) Install showerhead to shower arm (not included) turn-
ing clockwise to tighten.
1) Turn showerhead to desired mode of operation.
352SH, 352SH-3
Dia
™
Showerhead Series
Operation & Maintenance Manual
Installation Operation
1
2
Care and Cleaning
1) Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem
Cause
Solution
Finish is spotting.
Elements in water supply may cause
water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Showerhead is leaking from shower
arm when valve is in “on” position.
Coupling connecting showerhead
to shower arm is cracked or washer
inside coupling is worn.
Inspect coupling and washer
and replace showerhead if
necessary.