5
FIGURE 8.4
8. Installation - Shower Valve Trim
2) Place diverter/volume control handle into slot in shower
escutcheon (FIGURE 8.2).
3) Secure large shower escutcheon to mounting plate.
Guide handle into control port on valve body. Tabs
should snap in place (FIGURE 8.3).
4) Install dome cover by turning clockwise (FIGURE 8.4).
FIGURE 8.1
FIGURE 8.2
FIGURE 8.3
9. Installation - Showerhead & Tub Spout
FIGURE 8.5
2
1
1) Secure large mounting plate to Temptrol
pressure balancing valve using mounting screws
(FIGURE 8.1).
5) Place nylon insert into handle. Install handle to shower
valve. Secure with star washer, set screw and plug
button (FIGURE 8.4).
FIGURE 9.1
FIGURE 9.2
FIGURE 9.3
1) Attach shower arm to shower pipe. Turn clockwise to
tighten (FIGURE 9.1).
2) Install showerhead to shower arm. Turn clockwise to
tighten (FIGURE 9.2).
3) Install tub spout to stub out pipe. Turn clockwise to
tighten (FIGURE 9.3).