Page 11
Enable Units Selection (for 10g capacity unit only)
Press [On/Off] to turn the power off.
Press [Tare] first, then press [On/Off], while keeping [Tare] pressed.
The display will show “A-On” or “A-OFF”.
Next press [Unit] to enter the units selection mode, the display will
show “On ct”.
Press [Tare] to select On or OFF.
On means this weighing unit is enabled,
OFF means this unit is disabled.
5)
Press [Unit] to go to the next weighing unit. The following weighing
units can be selected in sequence.
ct – oz – dwt – tL.H – tL.S – tL.T (Note: g is always activated)
Turn the balance off and back to on again to return to normal operation.
NOTE: It is recommended that the balance is used in a location with suf-
ficient light so that the backlight function can be turned off to maximise the
battery life.
1)
2)
3)
4)
