Symmetricom TimeSource 3600, Manual

Page: 124 / 254

124
TimeSource 3600
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Command Format
A command consists of a command code of up to three fields
separated by hyphens, followed by parameter blocks separated by
colons. Figure 36 shows the command format. Parameter blocks
consist of one or more parameters separated by commas.
Parameter blocks may be null (contain no parameters), or contain
one or more parameters. Two colons occur next to each other if a
parameter block is null.
Multiple parameters in a parameter block are separated by
commas. Two commas occur next to each other if a parameter is
null.
Entering a semicolon at the end of the command indicates that the
command statement is completed to the interpreter, and executes
the command.
Figure 36. Command Format
Parameter
block
Null parameter
block
Parameter block, with parameters
separated by a comma
Optional
parameter
Command
code
Terminating
semicolon
Fields
command-code:[<tid>]::<ctag>::<date>,<time>;