Chapter 2 TL1 Reference
Set User Parameters
158
SSU-2000e Technical Reference
12713140-003-2 Revision E.01 – January 2007
Set User Parameters
This command allows changes to the user list.
Syntax
SET-USER:[tid]::ctag::mode,[username],[password],[userlevel];
You
must
issue the SET-PWD-CONFIRM command immediately after issuing this
command with the ADD, PWD, or TMP mode parameter.
Related Commands
Parameter
Format
Description
mode
ADD | PWD
ACC | DEL
INIT | DIS
ENA | ULK
TMP
ADD
– Adds an entry to the user table. Requires
username
,
password
., and level. Password
confirmation is required.
PWD
– Changes a user’s password. Requires
username
and
password
. Password confirmation is
required.
ACC
– Changes a user’s access level. Requires
username
and
password
.
DEL
– Deletes a single entry from the user table.
Requires
username
.
INIT
– Clears all entries in the user table, except
Guest and Admin. Does not require any other fields.
DIS
– Disables a user in the user table. Requires
username
.
ENA
– Enables a user in the user table. Requires
username
.
ULK
– Unlocks a user that is locked out. Requires
username
.
TMP
– Temporarily changes a user’s password. The
user must change the password on first log-in.
Requires
username
and
password
. Password
confirmation is required.
username
Specifes a user name, up to 20 characters long.
password
Specifes a password, up to 20 characters long.
userlevel
1 - 4
Defaults to 1 if not entered.