Symmetricom GoWide 4.6, User Manual

Page: 96 / 134

96
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Gateway Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
5
LAN Port Configuration
Clicking the Gateway hyperlink brings up the Configure LAN Port screen (Figure
63). Procedure T describes the method for configuring the LAN Port.
Procedure T
. Configuring LAN Port
Step Procedure
1
Select the Ethernet hyperlink in the System Menu (Figure 64).
2
If obtaining an IP automatically is desired, click the Obtain an IP automatically box under Local IP .
Otherwise, enter a value for the Local IP in the provided field.
3
Enter a value for the Subnet Mask in the provided field.
4
If RIP is not desired under Routing Table , deselect the box ( RIP Allowed is the default setting).
5
Select either DHCP Server , DHCP Relay , or Outbound Filtering under Advanced .
6
Enter the value for DNS Relay in the provided field.
7
Click the Apply button if all data is correct.
End of Procedure