background image

12

Rev 2.0, 8/1/94

7.  SX202 LIMITED WARRANTY                        

The Symetrix SX202 is designed and manufactured for use in professional and studio audio
systems. Symetrix, Inc., warrants that the SX202 manufactured by Symetrix, when properly
installed, used and maintained in accordance with instructions contained in the
manufacturer's operator's manual, will perform according to the specifications set forth in
the operator's manual.

Symetrix expressly warrants that SX202 will be free from defects in material and
workmanship for ninety (90) days. Symetrix' obligations under this warranty will be limited
to repairing and replacing, at Symetrix' option, the part or parts of the SX202 which prove
defective in material or workmanship within ninety (90) days from the date of purchase,
provided that the Buyer gives Symetrix prompt notice of any defect or failure and satisfactory
proof thereof. Products may be returned by Buyer only after a Return Authorization number
(RA) has been obtained from Symetrix and Buyer will prepay all freight charges to return any
products to the Symetrix factory. Symetrix reserves the right to inspect any products which
may be the subject of any warranty claim before repair or replacement is carried out.
Symetrix may, at its option, require proof of the original date of purchase (dated copy of
original retail dealer's invoice). Final determination of warranty coverage lies solely with
Symetrix. Products repaired under warranty will be returned freight prepaid via United
Parcel Service by Symetrix, to any location within the Continental United States. Outside the
Continental United States, products will be returned freight collect.

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, WHETHER
ORAL, WRITTEN, EXPRESS, IMPLIED OR STATUTORY. SYMETRIX, INC. EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY. SYMETRIX, INC.'S WARRANTY OBLIGATION AND
BUYER'S REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED
HEREIN.

The Symetrix SX202 is designed and manufactured for use in professional and studio audio
systems and is not intended for other usage. With respect to products purchased by
consumers for personal, family or household use, Symetrix 

EXPRESSLY DISCLAIMS ALL

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

This limited warranty, with all terms, conditions, limitations and disclaimers set forth herein,
shall extend to the original purchaser and anyone who purchases the product within the
specified warranty period.

Warranty Registration must be completed and mailed to Symetrix, Inc. within thirty (30)
days of the date of purchase.

Symetrix does not authorize any third party, including any dealer or sales representative, to
assume any liability or make any additional warranties or representation regarding this
product performance on behalf of Symetrix.

This limited warranty gives the buyer certain rights. You may have additional rights provided
by applicable law.

LIMITATION OF LIABILITY

The total liability of Symetrix, Inc. on any claim, whether in contract, tort (including
negligence) or otherwise arising out of, connected with, or resulting from the manufacture,
sale delivery, resale, repair, replacement or use of any product will not exceed the price
allocable to the product or part thereof which gives rise to the claim. In no event will
Symetrix, Inc. be liable for any incidental or consequential damages including but not limited
to damage for loss of revenue, cost of capital, claims of customers for service interruptions or
failure to supply, and costs and expenses incurred in connection with labor, overhead,
transportation, installation or removal of products or substitute facilities or supply sources.

Summary of Contents for SX202

















Reviews: