www.symetrix.co
| +1.425.778.7728
3 of 4
QUICK START GUIDE:
Control Server
Configuring IP Parameters
Locating Hardware
Discovery of, and connection to, Control
Server hardware is done with the Locate
Hardware dialog found under the Hardware
menu or by clicking the Locate Hardware icon
in the tool bar or on a particular Control Server
unit itself.
IP Configuration with Composer
The Locate Hardware dialog will scan the network and
list available units. Select the Control Server unit you
wish to assign an IP address to and click the Properties
button. If you wish to assign Control Server a static IP
address, select “Use the following IP address” and enter
the appropriate IP Address, Subnet mask and Gateway.
Click OK when finished. Now, back in the locate hardware
dialog, ensure the Control Server device is selected and
click “Select Hardware Unit” to use this Control Server
hardware in your Site File. Close the Locate Hardware
dialog.
The RJ45 connectors labeled “ARC” are only for use
with the ARC series of remotes. DO NOT plug the ARC
connectors on Symetrix products into any other RJ45
connector. The “ARC” RJ45 connectors on Symetrix
products can carry up to 24 VDC / 0.75 A (class 2 wiring)
which can damage Ethernet circuitry.
ARC Pinout
The RJ45 jack distributes power and RS-485 data to one
or more ARC devices. Uses standard straight-through UTP
CAT5/6 cabling
!
Warning! Refer to the RJ45 Warning for compatibility
information.
The Symetrix ARC-PSe provides serial control and power
distribution over standard CAT5/6 cable for systems with more
than 4 ARCs, or when any number of ARCs are located long
distances from a Symetrix DSP unit.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1 • AUDIO (+)
2 • AUDIO (-)
3 • COMMON GROUND
4 • RS-485 DATA (A)
5 • RS-485 DATA (B)
6 • COMMON GROUND
7 • POWER (+V)
8 • POWER (+V)
Note:
The ARC Audio line may be grounded at the
Symetrix rack-mount device and the ARC wall panel
to provide additional distance.
ARC PORT PINOUT
8
7
6
5
4
3
2
1
Pair 1
Pair 3
Pair 4
Pair 2
- or -
- or -
↓
Declaration of Conformity
We,
Symetrix Incorporated
, 6408 216th St. SW,
Mountlake Terrace, Washington, USA, declare under our
sole responsibility that the product:
Symetrix Control Server
to which this declaration relates, is in conformity with the
following standards:
Safety: UL/CSA/EN 60065
EMC:
FCC 15.107:2017, FCC 15.109:2017, ICES-
003:2017
CE Radio Equipment Directive (RED): EN 300 328
V2.1.1:2016, EN 301 489-17 v3.1.1:2017, EN 301
893 V2.1.1:2017, EN 55103-2:2009, EN 55032, EN
61000-4-5:2014, EN 61000-3-2:2014, RoHS (health/
environmental)
This device complies with Part 15 of the FCC Rules,
and Industry Canada RSS-310. Operation is subject the
following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with
the limits for a Class A device.
Wireless (Wi-Fi) is disabled in Control Server, by default,
but if enabled, must be set to the country/region the
unit will operate in. This is mandatory for regulatory
compliance!
FCC ID: N6C-SXPCEAN2
Canada 310
IC Number: 4908A-SXPCEAN2
Radio Make: Silex
Radio Model: SX-PCEAN2C
Intended Use (CE): Audio Processing and Control
Equipment
The technical construction file is maintained at:
Symetrix, Inc.
6408 216th St. SW
Mountlake Terrace, WA, 98043 USA
The authorized representative located within the European
Community is:
World Marketing Associates
P.O. Box 100
St. Austell, Cornwall, PL26 6YU, U.K.
Date of issue: 10/18/2017
Place of issue: Mountlake Terrace, Washington, USA
Authorized signature:
Mark Graham, CEO, Symetrix Incorporated.
