Symetrix 610 User Manual Download Page 13 | Manualshive

Page: 13 / 22

Symetrix 610 User Manual Download Page 13

Page 11

6

Troubleshooting

Solutions to common problems

There is no output signal.

Check the AC power connections to the 610.
Check input and output cables and connections.
Determine that there really is a signal coming from the source and that it is getting to the 610.

Distortion in the digital output signal.

Check the input signal. Is it overdriving the 610's input? If so, the INPUT HEADROOM display

should indicate so.
Is the incoming signal already distorted? Listen "up stream" from the 610 (or manually place the

unit in BYPASS mode) to determine that you are feeding it a clean signal.

Buzz in the output

Check input and output connector wiring.
Check for ground loops between interconnected system equipment.
Are all system components on the

same

AC ground?

Noise (hiss)

Check input signal levels and input level control settings. The input may be too low in level. If

so, boost the signal from your console or input source.
Is the input signal already noisy? Listen "up stream" from the 610 to determine if you are feeding

it a clean signal.

Less common problems

The 610 doesn't power up or doesn't respond properly.

Consult a qualified service technician or the Symetrix factory.

The 610 is not plugged in, but works great anyway.

Consult your doctor or therapist.

«
...
11
12
13
14
15
...
»

Summary of Contents for 610























Reviews:

No comments