Symetrix 610 User Manual Download Page 1 | Manualshive

Page: 1 / 22

Symetrix 610 User Manual Download Page 1

i

Model 610

Broadcast Audio Delay

Revision 1.4, 9 July, 1997
Symetrix part number: 530610
Subject to change at our whim and fancy, without notice.
Copyright 1996, Symetrix, Inc. All rights reserved.
Symetrix is a registered trademark of Symetrix, Inc.
Orban and OPTIMOD are registered trademarks of AKG Acoustics, Inc.
Mention of third-party products is for informational purposes only and

constitutes neither an endorsement nor a recommendation. Symetrix

assumes no responsibility with regard to the performance or use of these

products.
Under copyright laws, no part of this manual may be reproduced or

transmitted in any form or by any means, electronic or mechanical,

including photocopying, scanning, recording or by any information

storage and retrieval system, without permission, in writing, from

Symetrix, Inc.

User's Guide

Symetrix, Inc.

6408 216th St. SW

Mountlake Terrace, WA 98043 USA

Voice: (425) 778-7728

Fax: (425) 778-7727

Email: [email protected]

Website: www.symetrixaudio.com

1
2
3
...
»

Summary of Contents for 610























Reviews:

No comments