SYMEO Local Positioning Radar System
STU
Quick Start Guide
Connections
Copyright © Symeo GmbH 2011
Page 5 of 10
3
Connections
Power has to be connected to internal 3pin terminal connector. Ground has to be connected to the
terminal 2 (terminal in the middle of the connector), positive DC supply can be connected to two
outer terminals. The STU is fused, protected against overvoltage and against reverse polarity.
Attention: The STU is only rated IP65 if prober connectors (e.g. Harting Push Pull RJ45 part number
09451451100) are used and if all unused feed-through are properly sealed.
Power connector:
Positive supply e.g. 12VDC
Common Ground e.g. GND
Positive supply e.g. 12VDC
