18 © 2010 SymCom, Inc. All Rights Reserved
ACCESSORIES – RM-2000-DEMO
If using the RM-2000-DEMO, use the provided cable to connect the RM-2000-DEMO to the CIO-EN
(cable included with RM1000-DEMO). Be sure to attach the proper connector to the CIO-EN-DEMO
and RM-2000-DEMO (Each connector is labeled for the equipment it is to be connected to). Make
sure the jumper connector is securely fastened to the Prog. Lock jack on the back of the RM-2000-
DEMO. Once all necessary equipment is connected, connect power to the 777-P2-DEMO by
attaching the 12VDC cable to the connector on the side of the 777 module enclosure. NOTE:
Ensure all network connections are in place before applying power.
To enable communication between the RM-2000-DEMO and a PC (solutions software), connect the
PC port on the RM-2000-DEMO to the provided RS485-RS232 converter cable (included with
RM1000-DEMO). The RS485-RS232 converter cable can then be connected to the USB-RS232
converter included with the RM1000-DEMO and then connected to the PC. A demo version of
Solutions is available on the SymCom website in order to communicate with the demo units with a
PC.
