Symcode MJ-R38, Brochure

Page: 8 / 38

8
Ring Barcode Scanner
1st.Pressing the trigger for 8 seconds or scanning following setting code to
to make the scanner to enter bluetooth searching mode
2nd.Turn on the bluetooth of your device and searching bluetooth device
BluetoothPairing Method
3rd.Click“BarcodeScannerHID”when it comes out.One beep show
that scanner and your device connected.
Notes：When the scanner is entered bluetooth pairing status and it does
not get connected with your device within 1minutes,it will beep twice lowly
and longly.You need to repeat above-mentioned 3 steps to make it connect
with you device.(When the scanner is in the bluetooth pairing status,
double-click can make it exit the pairing mode).
Initialization Settings&Version Information
B：If you have after-sales problems and need to contact our customer
service staff, please provide version information by scanning setting
code“Version Information”
A：You can scan the setting code“Initialization Settings”to make
the scanner back to factory default settings
Bluetooth Pairing Setup Code
Initialization Settings
Version Information