Symcod LBC-02/IP Manual Download Page 3

KEYBOARD CONFIGURATION, IF YOU SEND THIS SEQUENCE AT LINE 3 OR MORE :

 

><K0  = Barcode set to OFF 
><K1  = Barcode set to ON 
><K2  = Keyboard set to OFF 
><K3  = Keyboard set to ON 
><K4  = Keyboard and Barcode set to OFF 
><K5  = Keyboard and Barcode set to ON 
><K6  = Keyboard mapping for UNIX 
><K7  = Keyboard mapping for AS/400 
><K8  = Keyboard AS/400 M5 = F5 
><K9  = Keyboard M5 = TAB 
><KH  = Keyboard AS/400 ESC = F12 
* In mode Keyboard and/or Barcode OFF, the Light LED of your terminal is locked to ON 

 
GENERAL CONFIGURATION, IF YOU SEND THIS SEQUENCE AT LINE 3 OR MORE :

 

><KT  = Disable Time and Date display 
><KJ  = Half Duplex mode 

(Default)

 

><KK  = Full Duplex mode 
><KL  = CapsLock ON 

(Default) 

><KM = CapsLock OFF 
><KN = Change cursor position: Line 2 Column 1 
><KZ = ESC 
><KPx = Pause x, 1 = .5 secondes (possible values 1 to 9, A to Z, a to z) 
><KWx=Watch dog configuration 0 = OFF, 1 = ON 

 
GENERAL CONFIGURATION, IF YOU SEND THIS SEQUENCE AT ANY POSITION:

 

><KI  = Clear Screen 
 

KEYBOARD DEFINES, IF YOU SEND THIS SEQUENCE AT LINE 3 OR MORE 

(Ver. 1.4L or more)

:

 

><KAx  = Key M1 = character x 
><KBx  = Key M2 = character x 
><KCx  = Key M3 = character x 
><KDx  = Key M4 = character x 
><KEx  = Key M5 = character x 
><KFx  = Key ESC = character x 
><KGx  = Key ENTER = character x 
If x = . then Key = Default value 
If x = - then Key = Tab 

 

Reviews: