Symbol WSS 1000, Product Reference Manual

Page: 85 / 133

7-2
WSS 1000 Product Reference Guide
WS 1200 Scanner
Wipe the scanner window periodically with a lens tissue or other material suitable for
cleaning optical material, such as eyeglasses.
Caution
Do not pour, spray, or spill any liquid on the scanner.
WS 1200 Mount
Periodically hand wash the WS 1200’s mount in warm water with a mild detergent and air
dry.
Storage
If the system is not going to be used for more than a week, store it in a cool, dry place, away
from dust. Remove the battery and repack the wrist computer and scanner in the original
shipping container.
For a storage period of a few days, the battery pack can remain in the wrist computer. If the
battery is left in the wrist computer for an extended period of time, data stored in memory
may be lost. To avoid losing data, keep the batteries charged, and be sure to transfer any data
before storing the wrist computer.
Replacing the WS 1200 Protective Cap
After extended use in harsh environments, the protective cap on the WS 1200 may need to
be replaced. To replace the cap that covers the scanner:
1. Remove all cables connected to the scanner.
2. Push up on the recesses between the cap and the scanner (located underneath the
scan window) until the tabs on the scanner pop out .
Figure 7-1. Removing cap