Symbol WSS 1000, Product Reference Manual

Page: 79 / 133

6-10
WSS 1000 Product Reference Guide
Scanning
The WWC 1000 supports several scanning devices, including:
•
RS 1 Ring Scanner
•
WS 1200 Back-of-Hand Scanner
•
Tethered scanners.
If you use a scanner other than the RS 1 or WS 1200 with the WWC 1000, follow its pertinent
instructions for installation and operation after verifying that you have the proper cable.
Note: Before scanning can occur, the application must implement routines
to support bar code scanning. For information on scanning
applications, refer to the Series 3000 ADK.
Bar code types (with full autodiscrimination) supported by the WSS 1000 include:
•
Code 3 of 9 (standard and full ASCII)
•
Code 128
•
Interleaved 2 of 5
•
UPC Versions A and E (EAN 8 and 13)
•
UPC-E1
•
Code 11
•
Codabar
•
Discrete 2 of 5
•
MSI/Plessey
•
Code 93.
Scanning with the RS 1
To use the ring scanner, power the system and scanner on by pressing the Power button or
the scanner trigger. To begin scanning:
1. Aim the scanning element at the bar code and press the trigger. The LED turns red to
indicate the scanner is on.