4
V
R
C
8
9
0
0
R
a
d
i
o
T e
r
m
i
n
a
l
Note:
Use only a Symbol-approved power supply, output rat-
ed 12V dc and minimum 9A
(p/n 50-14001-004). The
power supply is certified to EN60950 with SELV out-
puts.
Benutzen Sie nur eine Symbol Technologies geneh-
migt Stromversorgung in den Ausgabe: 12V dc und
minimum 9A (p/n 50-14001-004). Die Stromversor-
gung ist bescheinigt nach EN60950 mit SELV Ausga-
ben.
Note:
The terminal and bracket must be firmly secured to a
surface that can support the terminal’s weight.
W
ARNING
The VRC 8900 is intended for use on vehicles primarily op-
erating indoors, or for fixed indoor installation. the VRC 8900
should not be installed in fixed outdoor locations, or on a ve-
hicle primarily operating outdoors, unless additional environ-
mental protection is provided.
Charging the Internal Battery
When you receive your terminal, the internal battery is fully
discharged. Leave the terminal powered on for 24 hours to fully
charge the internal battery. Note that the terminal can charge the
battery while in Suspend mode, but not if power is removed.
The internal battery maintains the RAM memory for 72 hours when
fully charged. The data in the Flash memory or Flash file system
is not affected by the state of charge.
Note:
If the VRC8900 is being stored, it is important to re-
charge the internal battery every three to four months.
Battery degradation or failure may result.
