7
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
continuously updates until the SPS 3000 battery is fully charged
(100%). The expansion pack battery charges after the iPAQ
battery is fully charged.
Note:
The SPS 3000 scan only model does not include a bat-
tery. Therefore no external battery status bar displays
on the Power screen with a scan only model.
Charging the SPS 3000 Battery
(For WLAN Units)
The SPS 3000 battery is internal and cannot be removed. The
battery can be charged with the expansion pack connected to an
iPAQ or unconnected to an iPAQ.
Charging Expansion Pack
Alone
1. Insert the power plug
from the AC adapter into
the power jack on the
expansion pack. Plug
the other end into a wall
outlet.
Note:
A fully discharged
battery recharges
in approximately 2.5 hours. There is no indication that
the battery is charging or is fully charged. The iPAQ
must be used to check the battery status.
Charging Expansion Pack Connected to an iPAQ
1. Insert the power plug from the AC adapter into the power
jack on the iPAQ or on the expansion pack, or place the two
Expansion Pack
Power Jack
WLAN Units
