Symbol Series 6800, Product Reference Manual

Page: 52 / 138

4-9
Spectrum24 RF Terminal Setup
g. Select Terminal Sleep Mode from the main configuration menu. The Terminal
Sleep Mode screen ( Figure 4-8 ) is displayed.
Figure 4-8. Terminal Sleep Mode Screen
To change the current Terminal Sleep Mode, use the cursor keys to toggle
between the “On” and “Off” settings. The default setting is “On”.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
h. Select Boot Mode from the main configuration menu. The Boot Mode screen
( Figure 4-9 ) is displayed.
Figure 4-9. Boot Mode Screen
To change the current boot mode, use the keys to toggle among the three
settings: “Manual entry”, “BOOTP”, and “DHCP”. Refer to Appendix E for a
complete explanation of the three boot modes.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
TERMINAL SLEEP MODE
Radio state:
On
áâ
, Clear, Enter
áâ
BOOT MODE
IP address from:
Manual entry
áâ
, Clear, Enter
áâ