Symbol Series 6800, Product Reference Manual, Page: 46 / 138

4-3
Spectrum24 RF Terminal Setup
Initializing the Series
To initialize a 6840 which has LWP.HEX version 3.03 or greater loaded:
Note: This section covers specific settings required on first booting the 6840
out of the box. For a complete review of the CFG24 screens, refer to
Appendix E, Spectrum24 Utilities.
1. Insert a charged battery in the 6840. Refer to Chapter 6 for instructions on charging
and installing a battery.
2. Cold boot the 6840.
For the 46-key 6840:
s
Press and hold <A + B + D>.
s
Press and release PWR.
s
Release <A + B + D>.
3. The 6840 loads software, then brings up the Spectrum24 Configurator (CFG24)
menu, shown in Figure 4-1 .
Note: CFG24 comes up automatically after the first initialization out of the
box. On subsequent initializations, type CFG24 at the DOS prompt
to bring up the configurator.