Symbol SE 2223, Integration Manual

Page: 27 / 260

1-10
SE 2223/3223 Scan Engine Integration Guide
Beeper Definitions
Table 1-3 provides standard beeper definitions.
Macro PDF
Table 1-4 provides beeper definitions for Macro PDF mode.
Table 1-3. Standard Beeper Definitions
Beeper Sequence Indication
Standard Use
1 Beep - short high tone A bar code symbol was decoded (if decode beeper is enabled).
1 Beep - long high tone Thermal shutdown.
3 Beeps - short high tone Power-on or reset. Occurs immediately after the unit is turned on,
indicating that the system software is working properly. If three
beeps occur during normal operation, it is due to a reset and any
work in progress is lost. If this occurs often, contact the Symbol
Services Division.
Parameter Menu Scanning
1 Beep- short high tone Correct entry scanned or correct menu sequence performed.
1 Beep- hi/lo/hi/lo tone Successful program exit with change in the parameter setting.
2 Beeps - lo/hi tone Input error, incorrect bar code, or “Cancel” scanned, wrong entry,
incorrect bar code programming sequence; remain in program
mode.
Communication
4 Beeps - short high tone Communication error in the indication field.
4 Beeps - hi/hi/hi/lo Receive error.
3 Beeps - lo/hi/lo ADF transmit error.
Table 1-4. Macro PDF Beeper Indications
Beeper Sequence Indication
Error
1 Low Long Hi-level decode error caused by incorrect symbol.