Symbol PDT 8000, Product Reference Manual

Page: 50 / 376

1-30
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
Starting the Terminal
After installing and charging the battery, start the terminal by pressing the red power button
(see
Figure 1-14 ). If the terminal does not power on, reset it. See Resetting Your Terminal
on page 2-34.
Figure 1-14. Power Button
As the terminal initializes its unique Flash File System, the Symbol splash screen displays
for about 60 seconds. When the Welcome screen appears, tap anywhere on the screen to
continue to the Align screen. Note that these screens also appear every time you perform
a hard reset.
Aligning the Screen
To align your terminal so the cursor on the touch screen aligns with the tip of your stylus:
1. If necessary, adjust the backlight on the terminal so the screen is readable. See
Adjusting the Backlight on page 2-3.
2. Remove the stylus from its storage silo on the handstrap.
Power
Button