Symbol PDT 8000, Product Reference Manual

Page: 256 / 376

10-18
PDT 8000 Series with Windows
®
Mobile 2003 Software for Pocket PCs Product Reference Guide
9. Tap
Advanced
.
Figure 10-6. Advanced Settings
10. Select 19200 from the Baud rate: drop down menu.
11. Uncheck the Wait for dial tone before dialing checkbox.
12. Tap
OK
.
13. Tap
Finish
. Your new connection is created.
Connecting via GPRS
1. Ensure a SIM card is installed in the terminal. See Installing a SIM Card on page
1-23.
2. Ensure GPRS parameters are configured appropriately. See GPRS Parameters
Configuration on page 10-4.
3. Ensure a GPRS WAN connection is properly configured. See Configuring a GPRS
WAN Connection on page 10-15.
4. Tap Start - Settings.
5. Tap the Connections tab, and select Connections icon.
6. Tap the Advanced tab.
7. Tap
Select Networks
.
8. Ensure My ISP is selected from the Programs that automatically connect to the
Internet should connect using: drop-down menu.
9. Tap
OK
.
10. Tap
Select Locations
to configure dialing rules, if desired.