Symbol PDT 8000, Product Reference Manual

Page: 43 / 376

1-23
Getting Started
Installing a SIM Card
Note: A SIM card can only be installed in the WAN-enabled terminals, i.e.
PDT 8037 and PDT 8056.
Inserting a Compact Flash Storage Card
Note: A compact flash storage card can be installed in the PDT 8000,
PDT 8037 and PDT 8046 only.
The terminal has a slot for a compact flash storage card which includes a compartment door
that prevents the card from coming out if the terminal is dropped.
1. Slide the latches on the battery door up and lift the battery door away from the terminal. If the battery
is installed, remove it (see
Installing Batteries on page 1-8).
2. Slide the metal clip on
the SIM cardholder
door to the left to
release the SIM
cardholder. 3. Lift the cardholder
door to an upright
position
4. Insert the card
between the
cardholder body and
the metal clip; be sure
the beveled corner of
the SIM card is on the
top left. 5. Close the cardholder
door (with the contact
area of the card
facing down).
6. Slide the metal clip to
the right to lock it in
place.
SIM Card
Contact Area
7. Reinsert the battery and replace battery door (see Installing Batteries on page 1-8).