Symbol PDT 8000, Product Reference Manual

Page: 129 / 376

4-29
Communications
Launching the Internet
1. On the terminal, tap Start - Settings - System - eConnect and ensure the following
settings are made:
Figure 4-16. eConnect Settings - Launching the Internet via Ethernet
2. Tap the
OK
button.
3. Insert the terminal into the cradle. The cradle’s communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See
Communication LED Indicator on page 4-39 for other indications.
4. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection.
5. Once connected, tap Start - Internet Explorer to launch the browser.
6. To close your internet session, tap the two arrows on the navigation bar to expose
the Connected dialog box, then tap the
End
button. You may remove the terminal
when the connection has closed itself.