Symbol PDT 3200, Quick Reference, Page: 18 / 22

Quick Reference
16
With the PDT 3200 face down and the PC card face up, insert the
socket-end of the card into the card slot, as shown in the
illustration below. There are two tracks inside the slot to help
guide the card. Push the card firmly into the slot until the ejector
tab slides out. Then replace the PC card slot cover.
The PC card slot on the PDT 3200 is designed so that you cannot
insert a card upside down or backward. If you cannot push the
card all the way into the slot easily, you probably do not have the
card positioned properly. Make sure you are putting the end
with the holes into the slot first. Then flip the card over and try
to insert it again.
PCMCIA
EJECTOR
SWITCH