Symbol P470/P370, Product Reference Manual

Page: 30 / 208

2-10
P470/370 RF Scanner Product Reference Guide
Charge Status LED Indications
The LED indicator on the cradle uses flashing patterns to display the charger status, as
shown in the table below.
Changing the Battery
Once a battery is fully charged, it will generally last up to 10 hours without being returned
to the cradle. By returning it to the cradle during the day, you extend this time.
Removing the Battery
1. Slide the release latch down using center indent and remove the cover.
Figure 2-8. Removing the Battery Compartment Cover
Table 2-1. Cradle LED Indications
LED Status
Off The scanner is not in the cradle or has not been
properly inserted into the cradle.
Blinking Slowly The scanner is properly seated in the cradle and
charging will begin shortly.
Blinking Rapidly The battery is actively charging.
On Battery charging is complete.
Battery
Compartment
Cover
Battery
Release
Latch