Symbol P360, Product Reference Manual

Page: 34 / 198

3-2
P460/P360 Memory Scanners Product Reference Guide
Initial Powerup
After a few seconds, the System Banner is replaced by the system initialization screen.
After initialization, the scanner enters either the Scan & Transmit mode, or the Batch/
Inventory mode, depending on whether a communications cable is present or not. The
default communication protocols are:
• RS-232/Synapse - Scan & Transmit application
• RS-232/Synapse - Batch/Inventory application
If a Synapse cable is attached, the scanner automatically overrides the default settings.
Batch / Inventory Application
The batch/inventory application is a scan-and-store application that allows you to:
• Display and store (Batch) data for transmission later
• Eliminate repetitive scanning with a quantity entry feature
• Manually enter alphanumeric data if no bar code is present
• Review and delete stored records
• Transmit stored (batch) data to a host.
The scanner automatically detects and switches to batch/inventory mode operation when
it is removed from the cradle or its cable is disconnected.
The following Batch/Inventory screen appears:
Scanned bar code data is automatically displayed and stored for review/transmission to a
host at a later date.
If the scanner powers down, pull the trigger or press the <ENTER> key to wake it up.
Symbol Technologies
Initializing...
SCAN:___________________
__________________