Symbol P 370 RF, Reference Manual

Page: 30 / 183

2-8
P 370/470 RF Scanner Product Reference Guide
Optimizing RF Performance
The RF scanner is equipped with a low power 2.4 GHz radio. Depending on environmental
conditions, it can have an RF transmission range of 100 feet (30.5 meters). Where
environmental objects affect RF range and performance, do the following when you install
the scanning system. This will help assure peak performance.
The cradle is a charger, host interface, and receiving station for RF transmission. Therefore,
do not install the PL 470 inaccessibly under a table or buried in a desk drawer. At a minimum,
mount the PL 470 on a table or desktop. For optimum RF performance, especially in difficult
environments, mount the PL 470 on a wall as high as possible. But keep in mind the limits of
interface cable length and charging accessibility. Proper base positioning gives you the best
possible range and coverage performance from the RF scanning system.
Charging the Battery
Before its first use, the scanner’s battery must be charged. It can be charged:
!
using the cradle
!
Using the UBC 2000.
Using the Cradle
1. Set up the cradle as described in Setting Up the Cradle on page 2-3.
2. Insert the scanner into the cradle, so that the nose of the scanner and tip of the handle
seat into the receptacles.
Figure 2-7. Placing the Scanner into the Cradle
3. Check the charge status indicator light. See Table 4-1 on page 4-4.