Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 40 / 278

2 - 12 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Wired RS-232 Setup
The MK2200 can communicate with a host using a serial cable connected to the Scanner/Printer (RS-232)
port.
1.
Insert the power supply barrel connector into the MK2200 power port. See Figure 1-3 on page 1-5 .
2.
Route the power cable.
3.
Plug the Symbol AC power supply into a wall outlet.
4.
Connect the RS-232 serial cable to the Scanner/Printer (RS-232) port on the MK2200. See Figure 1-3 on
page 1-5 for port locations. Ensure the cable is terminated according to the Scanner/Printer (RS-232) Port
Connections pin-outs described in Table 2-4 on page 2-16 .
5.
Plug the other end of the serial cable into the host.
NOTE
Because there is no service running on the MK2200’s RS-232 port, harmful data cannot be
pushed to the MK2200 from another computer regardless of how the serial port is used.