Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 164 / 278

8 - 8 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Use the RDM Protected Mode feature (System Configuration/Protected Mode) to set up password protection.
See
Protected Mode on page 3-15 .
Remapping Buttons
Use the four buttons on the front of the MK2200 individually or in combinations. All 15 combinations can remap
to a virtual keycode that represents a given character or key sequence, as defined in
Table 8-5 . Holding any
combination that includes buttons B and C for more than 15 seconds causes a cold boot. Use the Control
Panel - Button Definitions, the System Menu, or RDM to remap the buttons (see Table 8-6 on page 8-9 ).
Table 8-4
Button Mappings for Protected Mode
Button Combo Character / Action Note
A and D Request Protected Mode Only for 2 seconds after boot
A ‘1’ During password entry
B ‘2’ During password entry
C ‘3’ During password entry
D ‘4’ During password entry
A and B ‘Enter’ (Return) During password entry
C and D ‘Escape’ (Cancel) During password entry
Table 8-5
Default Button Mapping
Button Combo Mapping Hex Code
A Up 0x26
B Down 0x28
C Left 0x25
D Right 0x27
AB Enter/Return 0x0D
AC Shift-Tab 0xC2
AD Alt 0x12
BC Show/Hide Virtual Keyboard 0xc7
ABC System Menu 0xC5
ABD Alt-Down 0xC3
ACD Touchscreen Calibration 0xC4
BCD Backspace 0x08