Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 160 / 278

8 - 4 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
User Application Version Reporting
SNMP reports user application names and version information as follows:
Upon boot up, the MK2200 reads a .reg file (e.g., application_name.reg) created and loaded into the
Application partition (folder), and loads its contents into the system registry.
Values under the registry key HKEY_LOCAL_MACHINE\Software\AppVersions represent software
components. Each value/data pair specifies the name of the component and its version, respectively. These
values must be string values.
The Symbol RDM and a number of off-the-shelf SNMP-based network management packages can read
application version information (see Software Version Information under
Monitoring MK2200s on a Network on
page 4-16 ).
For a sample .reg file see the Web Kiosk Software Suite Web_KioskSoftwareSuite.reg file which contains the
following text on two lines:
[HKEY_LOCAL_MACHINE\Software\AppVersions]
"Web_KioskSoftwareSuite"="x.x"
When an MK2200 that contains the Web_KioskSoftwareSuite.reg file in its Application folder (file is present at
bootup) is queried by the RDM for application version information, it returns the application name and version:
web_kiosksoftwaresuite
and
x.x
.
Scanner Hardware hrInstalledSoftware
Radio Driver hrInstalledSoftware
Radio Firmware hrInstalledSoftware
Radio Hardware hrInstalledSoftware
N User Application names/versions hrInstalledSoftware
Processor Name/Type hrDeviceTable
RAM Size hrDeviceTable
Flash Size hrDeviceTable
Other devices hrDeviceTable
Partitions - name/size
(Platform, Application, Data, Object Store)
hrPartitionTable
Filesystem Information hrStorageTable
Table 8-2
Reported Software Component Versions (Continued)
Item Host Resource MIB Location
NOTE
For tracking purpose, it is recommended that the name of the registry setting is the same
as the registry file name.