Symbol MK2200 MicroKiosk, Product Reference Manual

Page: 98 / 278

4 - 16 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
-
Specify the
Broadcast IP Address
, used in discovering devices on the network. The default value is
255.255.255.255. This causes discovery of all device in all network interfaces attached to a single
computer (multi-homed computer).
3.
Click OK to save the changes and close the
Options
window.
4.
Click Defaults to load the default settings for the RDM.
5.
Click Cancel to exit the
RDM Options
screen without saving the settings.
Monitoring MK2200s on a Network
Use the RDM to remotely monitor MK2200s connected through a network connection. After performing
discovery, double-click on an MK2200 from the discovery list, or click on the MK2200 in the list and select
View
> Device Information
from the RDM menu:
•
View device general information. See Device Information - Info Tab: Detected Device Information on
page 4-17 .
•
View software version information, such as applications, drivers, OS, and platform. See Device
Information - Software Tab: Version Information on page 4-18 .
•
View RAM and flash memory usage for the selected device. See Device Information - Storage Tab:
Memory Availability and Usage on page 4-19 .
•
View partition information for the selected MK2200. See Managing Static IP Addresses on page 4-21 .
Use the up and down arrow keys to navigate through the discovered devices to view information.
Click Refresh to refresh the device properties list.
Click Generate Report to place the information displayed in the tabs into a printable file.