Symbol MiniScan MS-804FZY, Integration Manual

Page: 49 / 184

4-3
MS-904HS Specifications
MS-904HS Technical Specifications
Table 4-2. MS-904HS Technical Specifications @ 23°C
Item Description
Power Requirements
Input Voltage
Scanning Current
Idle Current
Standby Current
V
cc
Noise Level
5.0 VDC ±10%
130 mA ±30 mA typical
70 mA ±10 mA typical
20 mA ±5 mA typical
100 mV peak-to-peak max.
Scan Rate 186 (±13) scans/sec (bidirectional)
Laser Power 0.8 mW ±0.1 mW,
λ
= 650 nm nominal
Print Contrast (minimum) 25% absolute dark/light reflectance measured at 650 nm
Scan Angle 37° (typical)
Skew Tolerance ± 45° from normal (see Figure 4-2 on page 4-5 )
Pitch Angle ± 60° from normal (see Figure 4-2 on page 4-5 )
Roll ± 30° from vertical (see Figure 4-2 on page 4-5 )
Ambient Light Immunity
Sunlight
Artificial Light 8,000 ft. candles (86,112 lux)
450 ft. candles (4,844 lux)
Drop Multiple 30” drops
Vibration Withstands a sinusoidal vibration of 4 G along each of the
mutually perpendictular axes for a period of 1 hr per axis over a
frequency range of 20Hz to 1600 Hz.
ESD ± 15kV air discharge
± 8kV indirect discharge
Laser Class CDRH Class II, IEC Class 2
Operating Temperature 32° to 104°F (0° to 40°C)
Storage Temperature -40° to 140°F (-40° to 60°C)
Humidity 5% to 95% non-condensing
Note: Environmental and/or Tolerance Parameters are not cumulative.