Symbol M2004-I418, Special Operating Instructions

Page: 4 / 42

M2004-I418 Special Operating Instructions
(73-39696-418)
Revision A: February 2004
4
details regarding the formatting of the row
data.
Custom Default Parameter
Settings*
Parameter Default Setting
Plural Stage Mode Use Recognition
Codes (RC Mode)
Decode 2-Stage bar codes
(Applies to RC Mode) Disabled
Decode 3-Stage bar codes (Ap-
plies to RC Mode) Disabled
Decode 4-Stage bar codes (Ap-
plies to RC Mode) Disabled
NRC Mode Plural Stage Select
(Applies to NRC Mode) 2
Transmit plural stage
recognition codes Enabled
Row 1 Data Format <Row 1 Data>
<Row 1 Suffix>
Row 2 Data Format <Row 2 Data>
<Row 2 Suffix>
Row 3 Data Format <Row 3 Data>
<Row 3 Suffix>
Row 4 Data Format <Row 4 Data>
<Row 4 Suffix>
Row 5 Data Format <Row 5 Data>
<Row 5 Suffix>
Prefixes and Suffixes for Rows
1-5 7013
(CR/LF for serial de-
vices, ENTER key for
others)
*Scanning "Set Defaults" will not restore the row recogni-
tion codes and associated location values to the defaults
shown in this table. Separate bar codes are provided that
allow the user to clear stored recognition codes. See
Clearing Recognition Codes on page 34 for bar codes
that clear stored recognition codes.