LS 6004-I0A0 Special Operating Instructions
(73-33186-0A0)
Revision A: March 1999
3
Decode Beep/LED Parameter
This option allows the user to select when the
decode beep and LED occur after a good de-
code for the Nixdorf host interface. All other
host interfaces operate as in Option 1.
Option 1
The decode beep and LED occur
after a good decode.
Option 2
The decode beep and LED occur
after the data is transmitted.
Option 3
(Mode B only). The decode beep
and LED occur after the data is
transmitted and the CTS line is
made active by the host.
Scan a bar code on the next page to select the
desired option.
