Symbol LS 3070, Quick Reference Manual

Page: 8 / 52

6
L S 3 0 7 0 S c a n n e r
6. Pair Scanner with Base/Charger
The wireless “connection” between the scanner and base/charger is
the low power radio transmission through RF transceivers in the
both the scanner and base/charger. The actual communication
consists of bidirectional message packets. However, the scanner and
base/charger must be paired for this communication to work
between the two devices.
To pair the scanner with the base/charger:
• Scan the PAIRING bar code on the next page or on the RL 470
base.
• Then insert the scanner into the base/charger’s cradle. You
have 15 seconds to do this, or there will be error beeps (4
beeps = unsuccessful pairing or base not powered). Note that
you cannot scan data until this linking is complete.
• At that time, through the scanner’s contact shoe, there is an
exchange of information (addressing, RF channels, etc.) be-
tween the scanner and the base/charger’s cradle. This occurs in
less than a second.
PAIRING
