Symbol LS 1006, Product Reference Manual

Page: 60 / 96

4-32
LS 1006 Product Reference Guide
Discrete 2 of 5
Enable/Disable D 2 of 5
D 2 of 5 Modulo 10 Check
When enabled, this parameter checks the integrity of a Discrete 2 of 5 symbol to ensure it
complies with specific algorithms.
Transmit D 2 of 5 Check Digit
When enabled, the D 2 of 5 Check Digit is sent to the host.
Fixed Lengths for Code D 2 of 5
Select one or two lengths for the Discrete 2 of 5 codes. If you set the both of them (Length 1
and Length 2) to 0, the scanner can read any length within 36 characters. It is recommended
that you set the D 2 of 5 modulus 10 check to enabled when you set both Length 1 and Length
2 to 0.
Enable Code D 2 of 5 Disable Code D 2 of
D 2 of 5 Modulo 10
Check Digit Enable
D 2 of 5 Modulo 10 Check
Digit Disable
Transmit D 2 of 5 Check Digit
Do Not Transmit D 2 of 5
Check Digit