Symbol iPOS TC, Product Reference Manual

Page: 43 / 54

3-17
Configuring the iPOS TC
7. Set the iPOS TC to download mode (see Downloading Files to the iPOS TC on
page 3-15). The iPOS TC sends the download message to the TC IFB Installer.
This can take a few minutes. When the TC IFB Installer receives the message, it
downloads the IFB to the iPOS TC.
When installation is complete, the following message appears:
STATUS: Upload completed successfully .
8. Select
OK
on the host computer to return to the main window, then select
OK
again
to close the TC IFB Installer application and save all changes made to the
application's settings.
Click
Cancel
to terminate the download process and return to the main window.
Click
Cancel
again to terminate the application and discard all changes to the
application's settings.
If the Download Fails
If an error occurs during download, re-start the process, including resetting the iPOS TC
(this returns the iPOS TC to download mode after a download failure). When the iPOS TC
enters download mode, it sends a download message once. Select the
Install
button on
the host computer before the iPOS TC enters download mode; if the TC IFB Installer isn't
waiting for the download message, it will miss the message.