Symbol Hotspot LS 2100, Product Reference Manual

Page: 130 / 350

9-3
Wand Emulation Interface
Wand Emulation Default Parameters
Table 9-1 lists the defaults for Wand Emulation host types. If you wish to change any option,
scan the appropriate bar code(s) provided in the Wand Emulation Host Parameters section
beginning on page
9-4 .
Note: See Appendix A, Standard Default Parameters for all user
preferences, hosts, symbologies, and miscellaneous default
parameters.
Table 9-1. Wand Emulation Default Table
Parameter Default
Page
Number
Wand Emulation Host Parameters
Wand Emulation Host Types Symbol OmniLink
Interface Controller
1
9-4
Leading Margin 80 msec 9-5
Polarity Bar High/Margin Low 9-6
Ignore Unknown Characters Transmit 9-7
Convert All Bar Codes to Code 39 Disable 9-8
Code 39 Full ASCII Conversion Enable 9-8
1
User selection is required to configure this interface and this is the most common selection.