Symbol DS 3408, Product Reference Manual

Page: 15 / 406

About This Guide
Introduction
The DS3408 Product Reference Guide provides general instructions for setting up, operating, maintaining, and
troubleshooting the DS3408 Standard Range and DS3408 High Density and DPM digital scanners.
Chapter Descriptions
•
Chapter 1, Getting Started provides a product overview, unpacking instructions, and cable connection
information.
•
Chapter 2, Scanning describes parts of the digital scanner, beeper and LED definitions, and how to use the
digital scanner in hand-held and hands-free modes.
•
Chapter 3, Maintenance and Technical Specifications provides information on how to care for the digital
scanner, troubleshooting, and technical specifications.
•
Chapter 4, User Preferences provides programming bar codes for selecting user preference features for the
digital scanner.
•
Chapter 5, Decoding Preferences provides programming bar codes for selecting digital scanner preference
features.
•
Chapter 6, Keyboard Wedge Interface describes how to set up a Keyboard Wedge interface with the digital
scanner.
•
Chapter 7, RS-232 Interface describes how to set up the digital scanner with an RS-232 host, such as
point-of-sale devices, host computers, or other devices with an available RS-232 port.
•
Chapter 8, USB Interface describes how to set up the digital scanner with a USB host.
•
Chapter 9, IBM 468X/469X Interface describes how to set up the digital scanner with IBM 468X/469X POS
systems.
•
Chapter 10, Wand Emulation Interface describes how to set up the digital scanner with a Wand Emulation
host when Wand Emulation communication is needed.
•
Chapter 11, Scanner Emulation Interface describes how to set up the digital scanner with an Undecoded
Scanner Emulation host.