4
C
y
c
l
o
n
e
TM
M
2
0
0
0
S
e
r
i
e
s
3. Insert the bracket’s keyholes over the screws, and slide the
bracket down to secure. If necessary, tighten the screws.
4. Slide the base of the scanner into the bracket with the scan
window facing down.
Electronic Article Surveillance (EAS)
(Optional)
Because there are several Checkpoint EAS systems available,
your local Checkpoint representative should install the EAS cable.
To contact your local Checkpoint representative inside the U.S.
call 800-257-5540, ext. 4300. Outside the U.S., call (609) 848-
1800, ext. 4300.
If you are using an EAS cable, refer to the Universal Cable EAS
Installation Sheet (Symbol p/n 70-32824-xx).
Scanning Modes
The M2000 may be used on the counter-top or in a hand-held
orientation. In hand-held use, the scanner operates in triggered
mode where you pull the trigger to activate the scan pattern and
decode the bar code. In counter-top use, the scanner operates in
continuous (constant-on) mode, where it automatically decodes a
bar code presented in its field of view.
